Wintures

Wintures trades under the company name Zhejiang Chuangli Welding Technology Co., Ltd. Its current catalogue splits the range in two: stud welding heads and stud welding equipment. Heads and power sources are therefore priced and specified as different items, and a buyer should ask for both when a complete working setup is needed.

A Jiashan government award list names Zhejiang Chuangli, which helps you match the company name printed on a quotation. That listing concerns the company. For any machine you shortlist, request the model datasheet with process, output and control details, plus the certificates for that model. An older news article on the Wintures site is no longer online, so base your enquiry on the current catalogue.

Sources [1] [2]

Stud welding succeeds or fails on the pairing of fastener and base metal. Send Wintures the stud drawing with diameter, length, material and coating. Add the substrate material, thickness and surface condition, since oil, paint or galvanising change how the weld forms. Mark every stud position on the part and say whether the back of the sheet is reachable.

State what both faces of the finished part must look like and the positional tolerance for each stud. Then ask Wintures to name its proposed method and surface preparation for that combination. Supply real samples, and include the thinnest sheet and the hardest position you will run. Your own acceptance procedure for the end product still governs the result.

A sound proposal names the process and lists the matched power source, head and consumables. Wintures may offer more than one route, such as capacitor-discharge or drawn-arc equipment. In that case, ask why each suits your attachment, and compare them on your stud and sheet rather than on headline power figures. Find out which settings the operator can change and which parameters the controller stores.

Drawn-arc stud welding draws a heavy current from the supply. Read the input rating on the source with the help of our nameplate guide, as you would for an arc welder. Where the studs will be placed by a robot or on a line, our welding automation category explains where the welding cell ends and the wider line begins.

Ask how the proposed station detects a stud that is missing or in the wrong place, and what happens to that part next. A screen on the controller tells you little about monitoring on its own. If Wintures offers process monitoring or traceability, request a sample output record and agree which details must be tied to each finished part.

Monitoring data earns trust once it lines up with physical joints that passed your tests. Plan to compare the two during the trial, and decide in advance how operators should respond when the system flags a suspect weld.

A head is one component in a wider workflow. Tell Wintures how studs reach it: placed by hand, fed automatically or supplied some other way. Give the stud locations, the part orientation and the loading method. For an automated offer, ask for a layout that shows the head, feeder, fixture and motion system drawn against your actual part.

Ask how the station switches to a new stud type or part variant, how an operator clears a jam and which steps stay manual. Allow room for maintenance and for changing wear parts. A price for a head or a source sits on a different footing from a quotation for a complete cell, so pin down who supplies and integrates each part before you weigh output or cost.

Work with your product engineers to fix the mechanical and visual checks. Decide where studs will be examined and how results are written down. Use production material in the trial, with its real coatings, preparation and thickness spread. Clean, ideal sheet can flatter any stud welder. Load-bearing or regulated parts need sign-off from your own engineers under the rules that apply to them.

Watch loading, positioning and welding over many repeated cycles. Measure the studs and look at the sheet around them, on both faces, as well as the weld itself. Note the source, head, stud and fixture used for every accepted sample, so the production station can be built to match.

For a custom station, list what Wintures will supply: feeding, motion, fixtures, controls and guarding. Ask for the power, air and installation needs of that exact package. Find out who commissions the process with production parts and who trains your operators on setup, changeover and fault recovery. Write all of this into the proposal itself.

Request manuals, electrical drawings, the accepted settings and a backup of the controller program. Ask for part numbers for heads and feed parts that wear, and which spares you can buy locally versus only from Wintures. Hand the accepted setup and spare-part list to your maintenance team on delivery.

Get Wintures to put the delivery date, current model availability, warranty terms and service arrangements on the quotation. Ask for the certificates that cover the exact source and head you are buying, issued in the name of the company that will invoice you.

When you set this offer beside others, check that every bidder quotes the same scope: head only, source and head, or a complete cell with feeding and fixtures. Ask for numbers on the catalogue, such as output figures, to be repeated on the quote for your model.

Compare the published product scope

Product families serve different tasks. Use the configuration and acceptance questions to request a quotation for the same work.

On a small screen, scroll sideways to read all three columns.

Buyer questions

Sources

Facts on this page come from the manufacturer's own publications and the public records listed below, checked on the date shown. Ask the manufacturer to confirm the exact configuration, documents and terms for your order in writing.

1. Wintures · Wintures company catalogue

   Manufacturer publication · Checked 2026-10-11

   The current Wintures site names Zhejiang Chuangli and lists stud welding heads and stud welding equipment as separate catalogue categories.

2. Jiashan government publication archive · Jiashan assessment award list

   Public record · Checked 2026-10-11

   A Jiashan government award list that names Zhejiang Chuangli. Use it to check the company name.

How we check information · Report an outdated detail