Biaoke Laser
Biaoke Laser in Ningbo sells laser cutting, marking, cleaning and welding equipment through several group businesses. Most of its published detail covers cutting. For a welding job, first ask Biaoke which group company will quote, build and support the machine, and get a named welding model with its full configuration.
标克激光智能装备科技（宁波）有限公司
Ningbo, Zhejiang, China
By WeldOrigin Editorial · Sources checked
In this profile
What Biaoke sells
Biaoke calls itself a laser-equipment integrator and supplier. Its company introduction lists four laser applications: cutting, marking, cleaning and welding. The group is split into several businesses with different jobs. One handles large fibre-laser cutting equipment, while others cover smaller laser applications.
For a buyer this means Biaoke is a broad laser house with cutting at its centre. Welding appears in the application list, yet the company introduction gives no welding model, power range or head design. A welding buyer should start the conversation by asking for a named welding machine and the group company that stands behind it. Our overview of laser welding explains how sources, heads and fixtures fit together.
Sources [1]
The EK3015 standard record
The Zhejiang standards portal shows a company self-declaration for the EK3015, a laser cutting machine, under GB/T 34380-2017. The entry was posted on 2026-05-11. The portal shows that Biaoke withdrew it on 2026-05-18.
The record concerns one cutting machine and one standard. It tells you nothing about welding performance, and it gives no welding certification. It also says nothing either way about the rest of the Biaoke range. If you buy a welding system, ask for current documents that name that exact system.
Sources [2]
Writing a welding brief for Biaoke
Give Biaoke the material, the thickness, the joint type, the fit-up variation and the result you need before you ask for a laser power. Say whether the work is manual, done on a dedicated fixture, or part of an automated cell. Mention access to both sides of the part, the finish you expect and any limit on distortion.
In return, ask for the exact welding model and a full configuration. That means the laser source, the delivery optics, the welding head, the controls and the way the part is held and moved. Ask Biaoke to mark which items are optional and which come from third parties. A cutting catalogue lists cutting features, so build the welding offer from welding documents only. Put each offer you receive on the same line-by-line basis, as described in our guide to comparing welding equipment quotations.
Which group company supplies what
Because Biaoke works through several businesses, ask which legal entity signs the contract. Then ask which one builds the machine, which one integrates it and which one commissions it on site. If more than one business is involved, request a simple responsibility map for the source, the control system, the fixtures and service.
The company named on the order, the one on the equipment plate and the one on the conformity documents should match before the machine ships. For export, find out who writes the manuals, who prepares documents for your country and who honours the warranty. A trading or sales arm of a group may offer machines that another member builds, so get that split in writing for your order.
Planning the laser cell and its safety
Ask Biaoke to propose an enclosure or other controlled work area, with access controls and a clear layout for loading and maintenance. Agree who assesses the laser hazards of the finished installation and who supplies the protective controls at your site. The right protection depends on the actual source and process.
Add fume extraction, cooling, utilities and space for the operator or for automated handling to the project scope. A laser source on its own is a long way from a working station. Request safety documents for the exact model and have competent people at your site review the proposed cell. The guide to laser welding cells, sources and safety lists the main points to cover.
Running a welding trial
Send real parts with the surface preparation and fit-up spread your production will see. Decide on the weld examination and dimensional checks before the demonstration starts. Inspect a run of repeated parts, since one good sample says little about a shift of production. Ask Biaoke to write down the configuration and settings behind every accepted part.
For automated work, include locating, loading, motion, unloading and recovery after a fault. For manual work, watch how much the result depends on the operator's position and skill. Measure accepted output over an agreed period, including handling. Leave cutting speeds, cutting thickness and promotional application claims out of the welding acceptance plan.
Documents, spares and support
Request a current welding datasheet, the machine identifiers, a packing list and the conformity documents for the system you are buying. When a certificate is offered, read its scope, its dates and who issued it.
Agree which optics and other wear parts you will need to replace, who services the machine, which manuals come with it and who commissions it. Price, delivery, model availability and warranty belong in the quotation itself. A sound order rests on a named welding system, a clear supplier, a full installation scope and accepted joints from your own parts.
Confirm before ordering
Get written answers from Biaoke on the points below before money changes hands.
Supplier: the legal seller, the builder and the company that commissions and services the machine, with names that match across order, plate and documents.
Machine: the welding model and every item in the package, including source, optics, head, controls, tooling and any third-party parts.
Documents: current certificates and conformity papers that name the exact welding system. The withdrawn EK3015 declaration covers a cutting machine only. The guide on verifying welding equipment certificates lists the checks.
Site work: the laser safety arrangement, utilities and who assesses the installed cell.
Commercial terms: price, delivery, warranty, wear parts and service cover.
Compare the published product scope
Product families serve different tasks. Use the configuration and acceptance questions to request a quotation for the same work.
On a small screen, scroll sideways to read all three columns.
| Product family | Published scope | Before selecting |
|---|---|---|
| Laser welding equipment [1] | Welding is one of the four laser applications named in the company introduction. | Ask for a named welding model, its full configuration and a trial on your parts. |
| Laser cutting equipment [1] | Large fibre-laser cutting machines, run by a separate group business. | Keep cutting models, sizes and speeds out of any welding specification. |
| Laser marking and cleaning [1] | Listed as separate laser applications within the group. | Ask which group company supplies them and request that company's own equipment documents. |
Buyer questions
Is the EK3015 a welding machine?
No. The EK3015 on the Zhejiang standards portal is a laser cutting machine. Its self-declaration under GB/T 34380-2017 was withdrawn in May 2026, so it gives no welding approval of any kind. [2]
Does the withdrawal mean every Biaoke product is faulty?
No. It is a fact about one declaration for one cutting machine. Judge the welding system you are offered on its own current documents and trial results. [2]
What does Biaoke need to send before I shortlist it for welding?
A named legal supplier, a welding datasheet for the offered model, the full installation scope and accepted joints made on your representative parts.
Which Biaoke company will I deal with?
That depends on the product. Biaoke runs several group businesses with different roles, so ask which one sells, builds and supports the welding system you want. [1]
Build a useful project brief
Check what you have prepared. Your selections stay in this page, are not uploaded and reset after a reload. Printing creates a copy; it does not send an inquiry.
0 of 8 items prepared
Opening the form pre-fills this company name. The request is saved only when you submit it, and our sourcing desk replies to you about the next step.
Sources
Facts on this page come from the manufacturer's own publications and the public records listed below, checked on the date shown. Ask the manufacturer to confirm the exact configuration, documents and terms for your order in writing.
- Biaoke Laser · 公司简介 - 标克激光 (company introduction)
Manufacturer publication · Checked 2026-10-11
Biaoke's own company introduction. It names the laser applications the group covers and describes the roles of its group businesses.
- Zhejiang Administration for Market Regulation standards portal · EK3015 cutting-machine self-declaration record
Public record · Checked 2026-10-11
Zhejiang standards portal entry for an EK3015 laser cutting machine declared under GB/T 34380-2017. It was posted 2026-05-11 and shown as withdrawn 2026-05-18.